Rutile coated electrode for joining dissimilar steels, depositing buffer layer before hardfacing and claddings on ferritic steels. The weld metal consists of austenitic Cr-Ni-Mn steel with possible small amounts of delta ferrite. The weld metal is highly crack resistant and therefore suited for joining difficult to weld steels and depositing stress relaxing buffer layers on crack sensitive base metal prior to hardfacing deposits. Weld metal work hardens by impact and pressure. Suitable for armour plates, high-manganese steels, rails, cross-overs, crane wheels, idlers, which are subjected to dynamically loading, pressure, impact and abrasion. It is non-scaling up to 850°C and highest operating temperature for dissimilar steel joints is 300°C. In the case of higher temperatures, use ENI 422 electrodes. Easy to use in positional welding and possible to use equally well both with AC and DC.

Rutile coated electrode for welding austenitic stainless Cr-Ni steels or cast steels, having an extra low carbon content, as well as stainless or heat resisting chromium steels or cast steels. Suitable for welding stainless steel tanks, valves, pipes and linings in chemical, food, beverage, pharmaceutical industries. For operating temperatures of up to 350°C, non-scaling up to 800°C. Possible to use equally well both with AC and DC. Easy arc striking and re-striking. Fine metal droplet transfer, good fusion of joint faces, finely rippled bead surface, easily removable slag.

Basic electrode, particularly designed for welding armour plates, dissimilar steels and for surfacing purposes. The weld metal consists of austenitic Cr-Ni-Mn-Mo stainless steel. It features high resistance to cracking caused by impact and high temperature and is therefore indicated for difficult to weld steels and depositing stress relaxing buffer layers on crack sensitive base metal or beneath hardfacing deposits. Use with DCEP. No pre-heat or post welding heat treatment is needed when welding armour plates. Interpass temperature should not exceed 120°C. Shall be used with shortest possible stick-out distance, at 90° angle to the work piece.

Rutile type austenitic stainless steel electrode for welding especially 304H and similar austenitic stainless steels or cast steels and heat resistant steels, having high carbon content. Suitable for welding stainless steel tanks, valves, pipes and linings in chemical, food, beverage, pharmaceutical, fertilizer industries. Weld metal is suitable for use at high operating temperatures and it is also non-scaling. Possible to use equally well both with AC and DC. Easy arc striking and re-striking. Fine metal droplet transfer, good fusion of joint faces, finely rippled bead surface, easily removable slag.

Electrode for joining dissimilar steels (austenitic steels to ferritic steels) and for austenitic claddings on ferritic steels. Weld metal consists of austenite with approx. 15% delta-ferrite. Claddings on unalloyed and low alloy steels are already corrosion resistant in the first layer. Highest operating temperature for joints between dissimilar steels is 300°C. In case of higher temperatures use ENI 422 electrodes. Fine metal droplet transfer, good fusion of joint faces, finely ripped bead surface, easy slag removal, easy arc striking and restriking.

Rutile type stainless electrode for joining dissimilar steels (austenitic steels to ferritic steels) and for austenitic claddings. Weld metal consists of austenite with approx. 15% delta-ferrite. Claddings on unalloyed and low-alloy steels are already corrosion resistant in the first layer, due to Mo (molibdenum) content. Higher operating temperature for joints between dissimilar steels is 300°C. In the cases of higher temperatures, use ENI 422 electrodes. Fine metal droplet transfer, good fusion of joint faces, finely ripped bead surface, easy slag removal, easy arc striking and restriking.

Rutile type stainless steel electrode for welding heat resisting chromium and chromium-nickel steels as well as cast steels. Weld metal deposit is fully austenitic stainless steel, containing 25% chromium and 20% nickel. Suitable for welding heat treatment and industrial furnaces and equipments which are subjected to service temperatures up to 1200°C. Weld metal is non-scaling up to 1250°C. Especially it is resistant to hot crack. Exhibits high charpy impact energy at low temperatures. Weld metal is not corrosion resistant to sulphurous combustion gases. Possible to use equally well both with AC and DC.

Rutile type stainless steel electrode for joining dissimilar steels and depositing claddings on ferritic steels. The ferritic-austenitic Cr-Ni weld metal contains approximately 50% of delta-ferrite and is non-scaling up to 1100°C. It features high resistance to cracking and is therefore suited for joining difficult to weld steels and depositing stress-relaxing buffer layers on crack sensitive base metals. Especially used in crack repair and build-up of tool and die steels, rebuilding of worn or cracked gear teeth, buffer layer on cutting blades. Suitable for welding galvanized steel plates. Possible to use equally well both AC and DC. Easy arc striking and re-striking. Fine metal droplet transfer, good fusion of joints faces, finely rippled bead surface, easy slag removal.

Rutile type stainless steel electrode for welding austenitic stainless Cr-Ni-Mo steels or cast steels, having an extra low carbon content. For operating temperatures of up to 400°C. Especially suitable for welding of stainless steel chemical tanks and pipes in chemical, textile, paint, paper industries. Possible to use equally well both with AC and DC. Easy arc striking and re-striking. Fine metal droplet transfer, good fusion of joint faces, finely rippled bead surface, easily removable slag.

Rutile type stainless steel electrode for welding stabilized austenitic stainless Cr-Ni steels, and cast steels, as well as stainless or heat resisting chromium steels to cast steels. Stabilized with Nb (Niobium) and resistant to intergranular corrosion. Weld metal is suitable for operating temperatures up to 400°C, non-scaling up to 800°C. Especially suitable for welding of stainless steel tanks, valves and pipes in milk, beverage, food, chemical and petrochemical industries. Possible to use equally well both with AC and DC. Easy arc striking and re-striking. Fine metal droplet transfer, good fusion of joint faces, finely rippled bead surface, easily removable slag.