RS 300 M
product code: 7120035004
- Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.
- Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.
- Separate wire feeding units are standard. Open Cabinet and Smaller Wire Feeding Units for 5 kg (D200) spools options are available.
- 4 roll drive system offers good feedability with long torches and offers less deformation on soft wires such as aluminum and flux cored wires.
- The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request.
- Optimum welding parameters can be obtained from the printed table inside of the wire feed cover.
- Wire feed speed and 2/4 trigger adjustments are on the front panel, Soft Start, Pre-Gas, Post-Gas, Burn-Back timer settings, manual wire feeding & gas valve buttons are inside of the wire feeding cabinet.
- Welding voltage is adjusted from the course and fine switches; increments are optimized to obtain welding parameters with lowest spatter levels.
- Digital displays on the power source for adjusting and monitoring of welding parameters.
- Multiple workpiece connections (Inductance outlets) enables optimum parameter adjustment for low spatter welding.
- ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used.
- 220V AC outlet for CO2 gas heater.
- Built in gas cylinder platform with large wheels to ease mobility in workshops.
- Fan cooling and thermal protection against overheating.
- Standard accessories come with the machine.